Flip-Flop - American Audio VELOCITY MP3 User Manual And Reference Manual

Hide thumbs Also See for VELOCITY MP3:
Table of Contents

Advertisement

FLIP-FLOP™

FLIP-FLOP™
This feature is kind of "auto pilot". When you are using the Velocity Mp3™ and an American
Audio® "Q"- Series mixer, you can have one player begin playback when the other ends. You can "Flip -
Flop™" single tracks, the entire disc, or a combination of the two. This function will not work with the Flash
Start™ function.
To FLIP-FLOP™ single tracks:
1) Connect your system as described in the set up section below.
2) Set your American Audio® "Q" Deck™ mixer's crossfader to the center position.
3) Set both sections of the Velocity Mp3™ to playback in single mode, SINGLE (69) should be indicated in the VFD
(17).
4) Load both side of the Velocity Mp3™ with CDs.
5) After they have both cued, press the PLAY/PAUSE BUTTON (23) on one of your drive to begin playback.
6) After the first player's single track has ended the second player's track will immediately begin playback.
7) FLIP-FLOP™ will continue until you stop it or power is interrupted.
To Flip-Flop entire CDs:
Be sure your drives are both in continuous play mode, be sure SINGLE (69) does not appear in the VFD (17).
Follow all directions for single track FLIP-FLOP™ play above. When one player's disc ends the other player
will immediately begin playback.
Note:
You may combine FLIP-FLOP™ single and continuously playback modes by selecting either single or
continuous playback on your units.
"Q"-START/FLIP-FLOP™ - FLASH START™ SET-UP
Connecting your Velocity Mp3™ to an American Audio
Start,™ Flash Start,™ and Flip Flop™ control: Be sure to connect 1/8" mono mini
plugs from the control connection on the rear your Velocity Mp3™ to the 1/8" control
jack on the rear of American Audio
FLOP.™ Note: The Flip-Flop™ function works in conjunction with the Q-Start™ func-
tion, therefore Flip-Flop™ will not function with the Flash Start™ function.
Sample "Q" Start/Flash Start Set-Up. This set-up will allow Q-Start™ and
Flip-Flop™ or Flash Start functions to operate. Be sure to use 1/8" mono
mini plugs only. Please note: Because the Flash Start™ and Q-Start™
functions use the same controller jacks on a mixer one or the other can be
used.
Velocity Mp3
©
"Q" series mixer. That's it, you'll be set for FLIP-
®
Compatible Q-Deck Mixer
American Audio
- www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 39
®
"Q" Deck™ mixer for Q-
®
AMERICAN AUDIO
Single black cross line
Single black cross line
Mono Mini Plug
Figure 75
Figure 76

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents