Creating A Seamless Loop - American Audio Encore 2000 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)
9. CREATING AND PLAYING A SEAMLESS LOOP
A seamless loop is a sound loop that plays continuously without sound interruption. You can use this loop to
create dramatic effect in your mixing. This loop has no time limit and you could actually loop the entire length
of disc. You create a seamless loop between two continuous points of a disc.
3) Press the OUT BUTTON (12) to set the ending point for your LOOP
(Figure 19). The IN BUTTON (12) and OUT BUTTON (12) LEDs will
immediately begin to flash rapidly, indicating the SEAMLESS LOOP
mode has been activated.
LCD LOOP INDICATORS
(53) will flash in the LCD DISPLAY (20) indicating a loop is active.
3) You may also use the SEARCH BUTTONS (17) to set a cue point. While
a disc is in PAUSE or CUE mode, use the SEARCH BUTTONS (17) to scan
through a track to find your desired starting point. Once you have found
your desired position press the PLAY BUTTON (13) to set your cue point.
Pressing the CUE BUTTON (15) will now return you to this exact point.
Figure 16
1) Press PLAY/PAUSE BUTTON (13) to activate playback
mode.
2) Press the IN BUTTON (12). This will set the starting point of the
SEAMLESS LOOP. The IN BUTTON (12) LED will light.
Figure 18
- During a loop, the RELOOP INDICATOR
American Audio - www.AmericanAudio.us - Encore 2000 Instruction Manual Page 21
© ®
Figure 17
Figure 19