System Memory - American Audio VELOCITY MP3 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)

16. SYSTEM MEMORY:

The Velocity Mp3 comes with an incredible memory system. The
Velocity Mp3™ can memorize virtually every customized setting
for a particular CD. The unit can memorize all customized effect
parameters, cue points, and samples used on a particular disk. To
store all your settings for a CD, press and hold down the MEMORY
BUTTON (12) for at least one second. When the memory has been
stored properly the MEMORY BUTTON LED (12) will turn off.
Figure 37
18. CLEAR ALL MEMORY:
You may clear the system memory at any time. This will erase
all your programmed memory and restore the unit to it's default
settings. To clear the memory; While main power is turned off,
turn the SEARCH KNOB (16) in a counter-clockwise direction.
While the search wheel is turned in a counter-clockwise direc-
tion turn main power on. The VFD (17) will flash three times and
default memory will be restored. Or, you can press the TIME
BUTTON (10) until "PRESET MODE" is displayed. Now turn the
PAREMETER TIME KNOB until "MEM CLEAR" is displayed and
then press the PARAMETER TIME KNOB and "ERASING" should
be displayed.
©
American Audio - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 26
®
Figure 36
17. RECALL FLASH MEMORY:
The Velocity Mp3 can store all your user programmed cue
points and effect parameters in to memory. These settings may
be recalled at any time, even when a disc has been removed
and reinserted at a later time. To recall the memory on a specific
disk; 1) Be sure a CD is not inserted in to the drive. 2) Press the
MEMORY BUTTON (12) down until the red memory LED turns
on. 3) Insert the CD. "RECALL" will appear in the VFD (17) while
the memory is being installed and the red MEMORY BUTTON
(12) led will turn off.
Figure 38