Basic Operations; Loading Ejecting Disc; Selecting Tracking - American Audio VELOCITY MP3 User Manual And Reference Manual

BASIC OPERATIONS

1. LOADING/EJECTING DISCS
The Velocity Mp3™ can only play regular 5 inch CDs. 3 inch, odd shaped, and oval CDs are not compatible.
When loading a CD into the transport drive, always hold the disc by it edge (see Figure 5). Load the disc label
side up and slide it in the disc slot. Never touch the signal surface (the glossy side). To remove a disc from the
slot press the EJECT BUTTON (11), see Figure 6.
CAUTION:
• NEVER attempt to insert any other objects beside 5" CD in the disc slot.
• NEVER attempt to insert more than one disc at a time. Doing so may result in sever damage to your unit.
• DO NOT force a disc into the slot when the power is off, this may damage the drive system.
Figure 5: When inserting a disc always hold the
disc by it edges and load the disc label side up.
2. SELECTING TRACKS
Select a desired track by using either of the two TRACK BUTTONS (3 & 4). Tapping the TRACK BUTTONS
(3 & 4) once will select either the next higher or lower track. You may hold down the TRACK BUTTONS (3 &
4) to change tracks continuously at a faster speed. If you are using the TRACK BUTTONS (3 & 4) to select a
new track during playback (a track is already in play mode) the new track you selected will immediately begin
playback as soon as the search operation is completed.
Figure 7: Tapping the reverse track button will
jump back to the previous track.
©
American Audio - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 16
®
Figure 6: Hold down the Eject
Button to remove a disc.
Figure 8: Tapping the forward track button
will skip forward to the next track.