American Audio VELOCITY MP3 User Manual And Reference Manual page 35

EFFECTS - FX MIX
FX MIX - BOP CONTROL:
playback and then return to normal playback within the same track. The effect will play out according to its
parameters and then resume normal playback. The procedure below list the steps to activate the FX MIX - BOP
Control. In the following example we will use the SKID effect.
Figure 62
STEP TWO:
Select the FX MIX BUTTON (6) to activate the FX
Mix Mode as in figure 64.
Figure 64
©
This function allows you to briefly engage any of the effects during a tracks
American Audio - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 35
®
STEP ONE: Be sure you are in continuous play mode, and
a track is playing. Turn the SKID effect on.
STEP THREE:
To initiate the FX BOP Function, tap the BOP/
ENTER BUTTON (34). At this point the effects will play out for
the length of the SKID value. When the effect has played out
normal playback will resume from the point the effect ended.
You can continue this effect at any time by repeating steps two
and three. You must be in continuos play mode for this effect to
operate properly, if the unit is in single play mode the track will
cue when the effect has played out.
Figure 63