Frame Search; Track Scanning (Fast Fwd/Fast Rev); Setting And Storing Cue Points - American Audio VELOCITY MP3 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)

7. FRAME SEARCH

This feature allows you to scroll through a track frame by frame,
allowing you to find and set a starting cue, sample, or loop point.
To use the scroll function you must first be in Pause Mode (see
section 5) or Cue Mode (see section 7). Once you are in Pause
or Cue mode, turn the JOG WHEEL (24) to scroll through the
track (Figure 13). Turning the wheel in a clockwise direction will
advance the frame search and turning the wheel in a counter-
clockwise direction rewinds the frame search. When you use the
JOG WHEEL (24) the monitor (headphone level) function allows
you to here what you are scrolling through. Once you reach your
desired starting point you can set a cue (starting) point by press-
ing the PLAY/PAUSE BUTTON (23) as in Figure 9. Pressing the
CUE BUTTON (22) as in Figure 10 will now return you to the point
you just set.
9. SETTING and STORING a CUE POINT:
Setting A Cue Point:
A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON (23) is pressed. You may
set your cue points anywhere on a disc or in a track. You may set up to four independent cue points per disk.
Three cue points are stored in the FLASH BUTTONS 1-3 (31) and one is shared by the IN BUTTON (33), BOP
BUTTON (34) and the CUE BUTTON (22). There are two (2) ways to set and create a CUE point as detailed in
figures 13 and 14
1) You may press the IN BUTTON (33) on the fly (while the disc
is playing). This will set a CUE Point without music interruption.
Pressing the CUE BUTTON (22) will now return you to the
same point that you pressed the CUE BUTTON (22). You may
now store this CUE Point in any of the FLASH BUTTONS
1-3 (31). Pressing the CUE BUTTON (22), BOP BUTTON (34) or
the IN BUTTON (33) will now return you to this exact point.
©
American Audio - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 18
®
8. SCANNING (FAST FORWARD / FAST REVERSE)
This function gives you a fast search through a disk or
track. Turn the SEARCH KNOB (16) in clockwise direction
for fast forward or turn the wheel counterclockwise for fast
reverse. You can scan in four different forward and four dif-
ferent reverse speeds depending on how much you rotate
the wheel.
Figure 12
Figure 13
Figure 11