American Audio VELOCITY MP3 User Manual And Reference Manual page 14

GENERAL FUNCTIONS AND CONTROLS (Cont.)
marked jacks on the rear of the controller unit.
46. DIGITAL OUT - This jack sends out a stereo,
digital matching the output of the RCA OUTPUT
JACKS (47). Use this connection to create near
perfect copies of your disc to a Mini Disc, CD-R,
or any other digital recording device.
47. AUDIO OUT R & L - These RCA output jacks
send out the analog audio signal and together
form a stereo signal. Use the supplied stereo
RCA cables to connect form a these jacks to a
mixer's or receiver's RCA line inputs.
48. POWER CONNECTOR - This connection
is the main power supply input. The unit is
designed to accept a standard I.E.C. removable
grounded power cord. Be sure that your local
power matches the unit's required power. NEVER
REMOVE THE GROUND PRONG FROM THE
POWER CABLE, DOING SO MAY RESULT IN
IMPROPER OPERATION.
49. REMOTE 1 INPUT CONNECTOR - This con-
©
American Audio - www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 14
®
nector is used to receive the control information
from the controller unit. Connect the supplied
D-Plug cables from these jacks to the similar
marked jacks on the rear of the controller unit.
50. DIGITAL OUT - This jack sends out a stereo,
digital matching the output of the RCA OUTPUT
JACKS (51). Use this connection to create near
perfect copies of your disc to a Mini Disc, CD-R,
or any other digital recording device.
51. AUDIO OUT R & L - These RCA output jacks
send out the analog audio signal and together
form a stereo signal. Use the supplied stereo
RCA cables to connect form a these jacks to a
mixer's or receiver's RCA line inputs.