– Connect the unit into an electrical outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/ TV technician for help. - www.americandj.com - SCD-100™ Instruction Manual Page 4 ®...
ELECTRIC SERVICE EQUIPMENT - www.americandj.com - SCD-100™ Instruction Manual Page 5 ® The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Caution! There are no user serviceable parts inside this CD player. Do not attempt any repairs your- self, without being instructed to do so by an authorized American Audio service technician. Doing so will void your manufactures warranty. In the unlikely event your CD player may require service, please contact American Audio customer support.
4) Warranty Card 2. Installing the Units 1) The SCD-100 is designed to placed on a flat level surface or installed into a standard 19” rack mount case or enclosure. When mounting the SCD-100 in a 19” rack be sure to support the unit by all four screw slots on the face of the unit.
4. LIQUID CRYSTAL DISPLAY (LCD) - This high quality LCD Indicates all the unit functions (play, pause, cue, etc..,), as they occur as well as dis- - www.americandj.com - SCD-100™ Instruction Manual Page 9 ® TRACK 1998.01.12...
Page 10
CD. - www.americandj.com - SCD-100™ Instruction Manual Page 10 ® TRACK BUTTON - This buttons is TRACK BUTTON - This buttons is...
Page 11
31. SECONDS METER - This meter will display the elapse, or remaining time in seconds. The display time will be indirect reference to the cur- rent time mode. 32. FRAME METER - This meter will display the - www.americandj.com - SCD-100™ Instruction Manual Page 11 ®...
2. LOADING DISCS The SCD-100 can play both 3 inch (8 cm) and 5 inch (12 cm) compact discs (CD’s). Odd shaped and oval CD’s are not compatible. When loading a CD into the unit always hold the disc by its' edges and place it in the disc tray.
COM PAC T DIGITAL AUD IO TER COMP ACTDISC PLA TRACK TRACK - www.americandj.com - SCD-100™ Instruction Manual Page 14 ® ). Pressing the PLAY/PAUSE BUTTON TRACK 1) Press the PLAY/PAUSE BUTTON (18) during playback to pause at that point.
You can scan in 4 different forward and 4 different reverse speeds depending on how much you rotate the wheel. Figure 10 - www.americandj.com - SCD-100™ Instruction Manual Page 15 ® Figure 9 TRACK...
To use the PITCH SLIDER COM PAC T DIGITAL AUD IO 1 BIT 8 T IMES OVERSAMPLING D/A CONVER TER COMP ACTDISC PLA - www.americandj.com - SCD-100™ Instruction Manual Page 16 ® TIME METER (30, 31, TIME METER ( This bar will Figure 11...
The speed you rotate the JOG WHEEL (13) will determine pitch bend per- centage, to a maximum of +/-16%. Figure 17 - www.americandj.com - SCD-100™ Instruction Manual Page 17 ® ll continue to the maximum of - ally return to it’s previous speed.
9) To cancel and clear the program press and hold down the PROGRAM BUTTON (6) for more than two seconds (see figure 29). Figure 30 - www.americandj.com - SCD-100™ Instruction Manual Page 19 ® TRACK Figure 27 TRACK...
C. This warranty is void if the serial number has been altered or removed; if the product is modifi ed in any manner which American Audio product; if the product has been repaired or serviced by anyone other than the American Audio factory unless prior written authorization was issued to purchaser by American Audio product is damaged because not properly maintained as set forth in the instruction manual.
Need help?
Do you have a question about the SCD-100 and is the answer not in the manual?
Questions and answers