American Audio VELOCITY MP3 User Manual And Reference Manual page 12

Hide thumbs Also See for VELOCITY MP3:
Table of Contents

Advertisement

GENERAL FUNCTIONS AND CONTROLS (Cont.)
effect comes with six presets, this button access
the presets. See page 31 for more information on
the presets.
31. FLASH BUTTONS 1-3 - These button are
used to store either three (3) cue points or three
(3) samples. Each Flash Button can store either
a sample or a cue point.
32. SAMPLER BUTTON - This is used to acti-
vate the sampler function. When this function
is activated a created sample will play in a con-
tinuos loop mode.
33. LOOP IN BUTTON - "CUE ON THE FLY" -
This function allows you to set a CUE POINT (see
CUE POINT page 18) without music interruption
("on the fly"). This button also sets the start-
ing point of a seamless loop (see SEAMLESS
LOOP).
34. BOP/ENTER BUTTON - During play mode,
pressing the BOP button will instantly return play
to the last set cue point without interruption of
music. Use this function to create a stutter effect.
When using the FX MIX (see page 34), this button
will activate the FX MIX function.
35. PITCH ON/OFF BUTTON - This button is
used to turn the PITCH SLIDER (36) function on
and off. This button will also change the pitch
percentage the PITCH SLIDER (36) will react to.
The pitch percentage can be changed between
4%, 8%, 16% and 100%. 4% will allow the least
amount of pitch manipulation and 100% will
allow the most amount of pitch manipulation. To
adjust to the different values please see page 25.
The LED above the PITCH ON/OFF BUTTON will
indicate which pitch percentage mode you are in,
glowing red for 4%, glowing green for 8%, glow-
ing orange for 16% or flashing green for 100%.
Note when LED is not glowing in any color the
Pitch Function is not activated.
36. PITCH SLIDER - This slider is used to adjust
the playback pitch percentage. The slider is a
set adjustment and will remain set until the pitch
slider is moved or the pitch function has been
turned off. This adjustment can be made with
or without a disk in the drive. The pitch adjust-
©
American Audio
- www.AmericanAudio.us - Velocity Mp3™ Instruction Manual Page 12
®
ment will remain even if a disc has been remove
and will reflect on any other disc loaded into the
player. That is to say, if you set a +2% pitch on
one disc, remove that disc and insert another,
that disc too will have a +2% pitch. The amount
of pitch being applied will be displayed in the
VFD (17).
CONTROLLER UNIT - REAR
37. CHANNEL 1 REMOTE JACK - Connect the
supplied 8 pin din cable from this jack to the play-
er's channel 1 remote connector. This will allow
you to control the functions of player 1.
38. CHANNEL 1 CONTROLLER JACK - Connect
the supplied mini-plug from the CUE jack on the
rear of your CD unit to the CONTROL out jack of
a compatible American Audio
mixer. This will enable the CD "Q-Start" function.
This feature is only available on American Audio
or American DJ
"Q" series mixers.
®
39. CHANNEL 2 REMOTE JACK - Connect the
supplied 8 pin din cable from this jack to the play-
er's channel 1 remote connector. This will allow
you to control the functions of player 2.
40. CHANNEL 2 CONTROLLER JACK - Connect
the supplied mini-plug from the CUE jack on the
rear of your CD unit to the CONTROL out jack of
a compatible American Audio
mixer. This will enable the CD "Q-Start" function.
This feature is only available on American Audio
or American DJ
"Q" series mixers.
®
or American DJ
®
®
®
or American DJ
®
®
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents