Frame Search; Setting A Cue Point - American Audio Encore 2000 User Manual And Reference Manual

BASIC OPERATIONS (CONT.)

7. FRAME SEARCH

This feature allows you to scroll through a track frame by frame, allowing you to
find and set a starting cue or loop point. To use the scroll function you must first
be in Pause Mode (see section 4) or Cue Mode (see section 8). Once you are in
Pause or Cue mode, turn the JOG WHEEL (11) to scroll through the track (Figure
13). Turning the wheel in a clockwise direction will advance the frame search
and turning the wheel in a counter-clockwise direction rewinds the frame search.
When you use the JOG WHEEL (11) the monitor (headphone level) function allows
you to hear what you are scrolling through. Once you reach your desired starting
point you can set a cue (starting) point by pressing the PLAY/PAUSE BUTTON
(13) as in Figure 11. Pressing the CUE BUTTON (15) as in Figure 12 will now return
you to the point you just set.

8. SETTING A CUE POINT

A cue point is the exact point playback will begin when the PLAY/PAUSE button (13) is pressed. You may set
your cue points anywhere on a disc or in a track. There are three (3) ways to set and create a CUE point:
2) You may also use the JOG WHEEL (11) to set a cue point. While a disc is
in PAUSE or CUE mode, use the JOG WHEEL (11) to scroll through a track
and find your desired starting point. Once you have found your desired CUE
point press the PLAY BUTTON (13) to set your cue point. Pressing the CUE
BUTTON (15) will now return you to this exact point.
NOTE: Scratch mode must be inactive for JOG WHEEL search mode to work. It is
best to use the rim of the JOG WHEEL.
1) You may press the IN BUTTON (12) on the fly (while the disc is playing). This
will set a CUE Point without music interruption. Pressing the CUE BUTTON
(15) will now return you to the same point that you pressed the IN BUTTON
(12).
Figure 14
American Audio - www.AmericanAudio.us - Encore 2000 Instruction Manual Page 20
© ®
Figure 13
Figure 15