Table of Contents
Advertisement
BASIC OPERATION
7. AUTO CUE
"Cueing" is the action of preparing for playback. When the unit is in cue mode the CUE LED (15) will flash
repeatedly. The unit is designed to automatically cue at the first audible signal on the first of a disc when a
disc is inserted. If a track is selected before a disc is inserted, the unit will automatically cue to the first audible
signal for the selected track.
8. FRAME SEARCH
This feature allows you to scroll through a track to set a cue, or
loop point. To use the scroll function you must first be in Pause
Mode or Cue Mode. Once you are in Pause or Cue mode, use
your finger tip to turn the JOG WHEEL (13) to scroll through
the track (figure 9). Turning the wheel in a clockwise direc-
tion will advance the frame search and turning the wheel in a
counter-clockwise direction rewinds the frame search. When
you use the JOG WHEEL (13) the monitor (headphone level)
of a mixer allows you to here what you are scrolling through.
Once you reach your desired starting point you can set a cue
(starting) point by pressing the PLAY/PAUSE BUTTON (18) as
in figure 9. Pressing the CUE BUTTON (16) will return the disc
to the cue point just set.
TRACK
COM PAC T
DIGITAL AUD IO
1 BIT 8 T IMES OVERSAMPLING D/A CONVER
ON
OFF
M
S
F
Figure 10
American Audio
- www.americandj.com - SCD-100™ Instruction Manual Page 15
©
®
TER COMP
ACTDISC PLA
YER
9. SCANNING (FAST FORWARD / FAST
REVERSE)
This function gives you a fast search through a disk or
track. To do this turn SHUTTLE WHEEL (12) in clock-
wise direction for fast forward or counterclockwise for
fast reverse. You can scan in 4 different forward and 4
different reverse speeds depending on how much you
rotate the wheel.
Figure 9
TRACK
M
S
F
Advertisement
Table of Contents
