Awc Setting (One-Push Adjustment) - Sanyo VCC-WD8575P Instruction Manual

AWC SETTING (One-Push Adjustment)

1 1 1 1
Select "AWC LOCK" – "SET".
AWC LOCK
GO TO MWB
R"SET" blinks.
2 2 2 2
Point a camera to a white paper or wall to project
an image on the whole screen, and press the SET
button.
White paper or wall
RThe blinking of "SET" stops and illuminates, and white balance
adjustment will start. The adjustment will end after about 2
seconds when the blinking of "SET" restarts.
• If the adjustment does not yield a satisfactory result, press the
SET button again.
AWC SETTING
SET
SET
SET
Adjusting White Balance
To perform fine adjustment of color
In the "AWC SETTING" screen, select "GO TO MWB" – "SET", and
press the SET button.
R The "MWB SETTING" screen appears. Specify values manually.
(See page 37)
MEMO: Transferring to the "MWB SETTING" through "GO TO
MWB", white balance mode (see page 34) will be changed to
"MWB".
3 3
3 3
Set "MENU" to "END" and press the SET button.
RFinishes the settings screen and returns to the normal
monitoring screen.
• If you want to return to the previous screen, select "BACK" and
press the SET button.
36
English