Controlling Ptzs; Step 1: Keyboard Setup; Figure 4-6 Serial Port Configuration Tab - Honeywell UltraKey Touch HJC4000 Installation And User Manual

Controlling PTZs

Step 1: Keyboard Setup

Document 800-06554 Rev C
02/11
Figure 4-6 Serial Port Configuration Tab
For a connection between Ultrakey Touch and a PTZ, see
Certain settings should be done before using the direct control of PTZ with Ultrakey Touch.
1. Set COM1 (RS485) according to the table below:
Type
BaudRate
Parity
DataBit
StopBit
UltraKey Touch Installation and User Guide
Figure
RS485
9600
None
8
1
4-2.
59