Honeywell UltraKey Touch HJC4000 Installation And User Manual page 63

Document 800-06554 Rev C
02/11
7. PTZ – VectorScan Once
Press PTZ call, select the VectorScan Once submenu
and press Ent.
8. PTZ – Preset List
Press PTZ call and Preset List is displayed on the LCD
screen. Press Ent to confirm the selection. Press the
Slider_Up/Down to scan to different pages.
9. PTZ – Preset Prog
Program Preset: Press View + number + Set.
Run Preset: Press View + number + Ent, or number +
View.
You can also edit or delete presets in the Setup menu. Press PTZ call on the
keyboard to select the Setup menu. Press Ent to confirm. Press the number of the
preset you want to select. Press Ent to confirm.
Note For ACUIX PTZs, Intellibus protocol only supports three Baud Rates: 9600,
19200, and 38400. Also, Intellibus protocol does not support Cascade
Linkage.
UltraKey Touch Installation and User Guide
<Cam 001>
VectorScan Once
<Cam 001>
Preset List
<Cam 001>
Preset Prog
63