Table of Contents
Advertisement
System Administration and Troubleshooting
System Administration Using the Controller LCD
Logging in and Navigating to the System Configuration Menu
Setting the Screen Language
Document 800-06554 Rev C
02/11
This section covers:
•
System Administration Using the Controller LCD
•
System Administration Using the Web Browser
To navigate all configuration LCD menus, see the
page 75.
1.
If not already done, install and connect the controller to a
power source.
The UltraKey Touch LCD displays.
2.
Enter the PIN password 1234.
3.
From the home screen, press Alt > Clr to enter the System Configuration.
1.
Log into the controller.
2.
From the System Configuration menu, press
Slider_Up/Down continuously to enter the language
setup menu, or rotate the slider until System
Configuration: Language appears. Press Ent.
3.
Press Slider_Up/Down keys to scroll through the options and select one. Press Ent
to save.
on page
65
on page
67
System Configuration Menu Tree
CAM 001 DVR 1
ST
Logout
System Configuration
Language
5
on
65
- Quick Links:
- Logging Onto the Controller
Hide quick links:
Advertisement
Table of Contents
