Step 2: Configure The Ultrakey Touch For Dvr Use; Step 3: Configure The Ultrakey Touch Ethernet Connection Settings; Figure 3-5 Ethernet Port Connections To Dvr - Honeywell UltraKey Touch HJC4000 Installation And User Manual

Connecting UltraKey Touch to a DVR

Step 2: Configure the UltraKey Touch for DVR Use

Step 3: Configure the UltraKey Touch Ethernet Connection Settings

36
Figure 3-5 Ethernet Port Connections to DVR
UltraKey Touch
Master
Note If any mode other than DVR has been selected, then use the procedure in
Step 2: Configure the UltraKey Touch for DVR Use on page 28
mode. Otherwise skip to the next step.
1. Press Alt > Clr to enter the System Configuration menu.
2. Rotate the slider or press the LCD up/down arrow keys to scroll through the options
(standalone settings, serial port, network, language, slider update, cascade linkage,
hardware test, about, and restore default).
3. Press Ent when you are at the System Configuration:
Network menu.
Network
Port
Network
Cable
NETWORK
Network Network
Cable Cable
Network Port Network Port
Slave 1
Network
Cable
Network Port
Slave 2
to select DVR
System Configuration
Network