Table of Contents
Advertisement
Installing UltraKey Touch with PTZ
Configuring UltraKey Touch Using the Web Browser
(Optional)
Logging into the Web Browser
Step 1: Configure UltraKey Touch to System Configurations
56
1.
If not already done, navigate to, or copy and paste, the applicable IP address into
your web browser:
•
LAN connections: for example, the default IP is http://192.168.1.9.
•
Crossover cable connections - static address: http://192.168.1.9.
2.
Enter Administrator (case sensitive) in the User Name field (see
3.
Enter 1234 (default) in the Password field.
4.
Click Login.
Figure 4-3
UltraKey Touch Login page
1.
Log into the web browser.
2.
From the top menu, click the Configuration tab.
3.
From the side menu, click the System Configurations tab.
4.
From the System Mode drop-down list, select Standalone (see
5.
From the System Language drop-down list, select English.
6.
Click Apply to save the configuration, Cancel to exit without saving or Default to
restore all factory default values.
Figure
4-3).
Figure
4-4).
- Quick Links:
- Logging Onto the Controller
Hide quick links:
Advertisement
Table of Contents
