Connect To The Ultrakey Touch Using The Serial Port (Rs485); Step 1: Connect To The Ultrakey Touch Using The Serial Port; Table 3-3 Serial Port Com1 (Rs485) Pin Assignments - Honeywell UltraKey Touch HJC4000 Installation And User Manual

Connecting UltraKey Touch to a DVR

Connect to the UltraKey Touch Using the Serial Port (RS485)

Step 1: Connect to the UltraKey Touch Using the Serial Port

30
6. Press the Slider_Up/Down or LCD up/down arrow
keys to select Com2 (RS232). Press Ent or
Slider_Right to confirm, and Slider_Left to return.
7. The Serial Setting menu displays. Here you can set the Com2 (RS232) settings for
parity, baud rate, data bit and stop bit:
a. Press the Slider_Right to select Parity. Press Ent
and use the Slider_Up/Down or the LCD up/down
arrow keys to select None. Press Ent to save.
b. Press the Slider_Down or the LCD up/down arrow
keys to select Baud Rate. Press Ent and use the
up/down arrow keys to select 1200, 1800, 2400,
4800, 9600, 19200, 38400, or 57600. Press Ent to
save.
c. Press the Slider_Up/down or the LCD up/down
arrow keys to select Data Bit. Press Ent and use
the Slider_Up/Down to select 7 bit or 8 bit. Press
Ent to save.
d. Press the down arrow key to select Stop Bit.
Press Ent and use the Slider_Up/Down or the
LCD up/down arrow keys to select 1 bit or 2 bit.
Press Ent to save.
8. Press Slider_Left to return to the main menu.
Table 3-3 Serial Port Com1 (RS485) Pin Assignments
Serial Port Type
COM1 RS485
Note For a list of cable accessories, see the
port connections, see
page 18.
1. Select the applicable adapter plug and insert it into the AC adapter. Push to click it
into place.
Pin Signal
1 T/R+
2 T/R–
Shipping Checklist
UltraKey Touch Port Connections and Descriptions
Serial Port:
Com2(RS232)
Serial Settings:
Parity
Serial Settings:
Baud Rate
Serial Settings:
Data Bit
Serial Settings:
Stop Bit
on page 17, and for
on