Controlling A Ptz Camera - Honeywell HEGSA002 User Manual User Manual

3.4 RUN MODE, CONTINUED

3.4.4 Controlling a PTZ camera

To operate a PTZ camera, you must meet the following criteria:
1. A monitor must be selected;
2. The monitor must be displaying the PTZ camera;
3. The camera must have PTZ capability
PAN LEFT
PAN RIGHT
TILT UP
TILT DOWN
NOTE: The tilt up and down functions may be reversed, depending on your system's
configuration.
If the PTZ camera is equipped with manual iris and/or a zoom lens, the following PTZ
functions apply.
IRIS +
IRIS -
ZOOM IN
ZOOM OUT
FOCUS -
FOCUS +
518750-2960
Rev. F
Push (and hold) the joystick toward the left.
Release the joystick to halt the pan function.
Push (and hold) the joystick toward the right.
Release the joystick to halt the pan function.
Push (and hold) the joystick up away from yourself.
Release the joystick to halt the tilt up function.
Push (and hold) the joystick down toward yourself.
Release the joystick to halt the tilt down function.
Press (and hold) the iris + button to open the lens iris until the
desired iris setting is achieved, then release the button.
Press (and hold) the iris - button to close the lens iris until the
desired iris setting is achieved, then release the button.
Press (and hold) the zoom in key until the desired setting is
achieved, then release the button.
Press (and hold) the zoom out key until the desired setting is
achieved, then release the button.
Press (and hold) the focus – key to "far" focus the lens. Releasing
the key halts the focus function.
Press (and hold) the focus + key to "near" focus the lens.
Releasing the key halts the focus function.
19 HEMU001007
10/15/04