Honeywell UltraKey Touch HJC4000 Installation And User Manual page 45

You want to...
Auto Sequence
Toggle Relay (alarm output) on a
specified channel
Instant Record
Switch to Full Screen Display
Select a Camera to Display
Reverse Play
Stop
Play
Adjust the forward or backward
playback speed
Zoom (if only one camera is
selected in Search)
Search Date
Navigate the Search date set menu
Display video of the previously
selected camera
Display the 4-camera split screen
Display the 9-camera split screen
Display the 16-camera split screen
Document 800-06554 Rev C
02/11
Table 3-8 Operating a Fusion DVR
Do this...
Press Seq to toggle Auto Sequence on a Fusion DVR.
Press the number key (less than 5), then Alarm.
Press the number key, which represents a specific channel, followed by
the Recycle key to toggle instant recording on that specified channel.
Press Ent.
Press number + Camera, or Camera + number + Ent, or number+Ent.
Press Backward to make a DVR play backwards while searching.
Press Stop to halt video playing on a DVR.
Press Review to make a DVR play forwards while searching.
Rotate your finger on the touch pad slider.
Press Set to adjust the zoom level from level 1 to level 5.
Press Search to display the Search menu for configuring the date, month
and time for playback.
When the DVR is in search play mode and the channel to play has been
set, users can press F1 to display the Search menu.
See the table below for the keyboard operations for navigating the Search
Date Set menu.
Press...
F2
F7
F6
Press F3
Press F4
Press F5
Press F9
Note For more information about PTZ operation for Fusion, see
Selection on page
PTZCALL).
UltraKey Touch Installation and User Guide
To... Press...
Up F8
Down Ent
Left Clr
60 and Operating a PTZ Camera
To...
Right
Confirm
Esc
Step 2: Camera
on page 60 (excluding
45