Honeywell UltraKey Touch HJC4000 Installation And User Manual page 38

Connecting UltraKey Touch to a DVR
38
Note The IP address of the master or slave keyboard is both referred to IP address
in the Network menu.
1. Press Alt > Clr and scroll with the slider. The Cascade
Linkage menu appears.
2. In cascade mode, you can set the keyboard status
(such as master or slave), and the cascade IP address if its status is set as "slave".
3. Press the Slider_Right to enter the Cascade Linkage menu.
There are two menu items: KBD Mode and IP Address.
• In the KBD Mode menu, the keyboard can be set as master or slave;
• In the IP Address menu, when the keyboard is in slave statues, you should
set this cascade IP address to match the master's IP address.
4. Press the Slider_Up/Down to scroll to KBD Mode and press Ent.
Set the keyboard as master or slave, and press
Slider_Right or Ent to confirm.
5. For a slave keyboard, press the Slider_Left to return to
the Cascade Linkage menu. Press the
Slider_Up/Down until the IP Address menu displays,
then set this cascade IP address to match the master's
IP address.
6. For a master keyboard, this cascade IP address is
invalid. Set the master's IP address in the Network
menu.
7. Press Ent. Rotate the slider and use the numeric keypad to enter an IP address, as
required.
Note The slave keyboard's cascade IP address in the Cascade Linkage submenu
must be the same as the master keyboard's IP address in the Network
submenu. The master keyboard's cascade IP address in the Cascade
Linkage submenu is invalid.
8. Press Ent to confirm.
System Configuration
Cascade Linkage
Cascade Linkage:
KBD Mode
Cascade Linkage:
IP Address
Network:
IP Address