Hrdp Operation Commands; Table A-3 Hrdp Operations - Honeywell UltraKey Touch HJC4000 Installation And User Manual

Dvr and ptz keyboard controller
Table of Contents

Advertisement

Keys...
Alarm
Monitor
Recycle
Live/Search
Review
Stop
Next Frame
Previous Frame
Forward
Backward
Set
PTZ Control

HRDP Operation Commands

Keys...
Number keys
Display
Seq
Alarm out
Instant record
Camera
Live/Search
Document 800-06554 Rev C
02/11
Table A-2
HRXD/HRSD Operations (cont'd)
Function...
If an alarm is active, press Alarm to reset the output of DVR (including internal buzzer).
If the DVR is in live monitoring mode (and no alarm is active), press Alarm to display the
event log.
To display a camera on the spot monitor, press Monitor+number+Ent to select a Spot
Monitor, then number + Camera, or Camera + number + Ent, or number + Ent.
Press to enable/disable the PANIC RECORD on specified channel.
Press to bring up the Search menu. Press again to exit the Search menu.
Press to playback or pause the DVR video.
Press to switch between live monitor state and pause state.
Rotate the slider clockwise to show the next frame when the DVR is in pause state.
Rotate the slider counter-clockwise to show the previous frame when the DVR is in pause
state.
Press to make DVR playback quickly.
Press to make DVR rewind quickly.
Press to zoom the image on the screen.
Press Alt+Set to enable HJC4000 to control PTZ of HRXD/HRSD.
Table A-3
HRDP Operations
Function...
Press a number key + DVR, or DVR + number + Ent to select a DVR to control.
Cannot take number inputs. Press Display in Live mode to cycle through the different
displays.
In Live and Search modes, press Seq to Auto Sequence (rotate) through the remaining
channels within the display mode, or to rotate the display configuration.
In PTZ mode, Seq can be used to enter PRESET mode.
Not supported.
Press Recycle to start instant recording of all channels.
Press the number key + Camera, or Camera + number + Ent, or number + Ent to show
the specified camera in full screen.
Toggles Fusion Live/Search Display.
In PTZ mode, Live/Search can be used to enter FOCUS mode.
UltraKey Touch Installation and User Guide
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents