Honeywell UltraKey Touch HJC4000 Installation And User Manual page 49

You want to...
Auto Sequence
Configure Alarm Out settings
Instant record
Display a selected camera in full screen mode
Toggle between Live view and Search
Enter FOCUS mode while in PTZ mode
Play videos in reverse
Stop playback
Play recorded videos
Zoom in on video
Enter Backup mode while in Live or Search
mode
Enter the express search mode
Navigate the menu
Cycle through different displays in Live mode
Start Panorama Search in playback mode
Start Smart Search in playback mode
Enter PTZ mode
Exit PTZ mode
Document 800-06554 Rev C
02/11
Table 3-10 Operating an HRDP DVR
Do this...
Press Seq to cycle through the remaining channels within
the display mode or rotate the display configuration. For
both live viewing and searching, in PTZ mode, Seq can be
used to enter PRESET mode.
Not supported.
Press Recycle to start instant recording of all channels.
Press a number key + Camera, or Camera + number +
Ent, or number + Ent.
Press Search.
Press Search.
Press F6 or Reverse. You can continuously press Reverse
to change the playback speed.
Not supported.
Press F8 or Forward. You can continuously press Forward
to change the playback speed.
Image Zoom function is not supported in Live or Search
mode. But when an HRDP is in PTZ mode, press the Set key
to enter ZOOM mode.
Press Set.
Press F1 while in Search mode.
See the table below for the keyboard operations for
navigating menus.
Press...
F2
F7
F6
Press F3, F4, F5, F9.
Press F2.
Press F7.
Press F10.
Press Clr.
UltraKey Touch Installation and User Guide
To... Press...
Up F8
Down Ent
Left Clr
To...
Right
Confirm
Esc
49