Honeywell UltraKey Touch HJC4000 Installation And User Manual page 62

Installing UltraKey Touch with PTZ
62
PTZ call for Intellibus Protocol
Familiarize yourself with these basic operations before you start configuring the menus:
• Press Ent to enter the setup menu and the submenus displayed on the LCD
screen. Press the number on the keyboard to select a submenu, then press Ent
to confirm the selection.
• Press Clr to exit from the Dome OSD display.
• Press Alt + Clr to return to the main menu.
• Press numbers on keyboard to input numbers and press F6/F8 to change the
coordinates for inputting the numbers.
• Press PTZ call to select the Setup menu and then press Ent. The Sel Character
menu displays. Press the LCD Left/Right arrow keys to skip character pages and
select the character by pressing the button below the character.
• Press PTZ call to select the List menu (Sector List, VectorScan List, VectorScan
View, and Preset List) and then press Ent. The List menus are listed on the LCD
screen. Press the Slider_Up/Down to scan to different pages.
For Intellibus protocol, press PTZ call and the following options are displayed in sequence
by rotating the slider. Press Slider_Right or Ent to select an option.
1. PTZ – Setup
Press Ent. The Sel Character menu displays on the
keyboard LCD.
Press a number on the keyboard to select a submenu
on the LCD screen, then press Ent to confirm the
selection.
2. PTZ – Sector List
Press PTZ call and Sector List is displayed on the LCD
screen. Press the Slider_Up/Down to scan to different
pages.
3. PTZ – Sector Prog
Press PTZ call, select Sector Prog and press Ent. You
can edit, program or delete sectors from this menu.
4. PTZ – VectorScan List
Press PTZ call and VectorScan List is displayed on the
LCD screen. Press Ent to confirm the selection. Press
the Slider_Up/Down to scan to different pages.
5. PTZ – VectorScan Prog
Program VectorScan: Press Tour + number + Set on
the keyboard.
Run VectorScan: Press number + Tour, or Tour + number + Ent.
You can also edit or delete presets in the Setup menu. Press PTZ call on the
keyboard to select the Setup menu. Press Ent to confirm. For example, press number
3 to enter the third menu and then 7 to enter the submenu. Press Ent to confirm.
6. PTZ – VectorScan View
Press PTZ call and VectorScan View is displayed on
the LCD screen. Press Ent to confirm the selection.
Press the Slider_Up/Down to scan to different pages.
<Cam 001>
Setup
Sel Character
<A B C>
<Cam 001>
Sector List
<Cam 001>
Sector Prog
<Cam 001>
VectorScan List
<Cam 001>
VectorScan Prog
<Cam 001>
VectorScan View