Monitoring Tppl Via The Optional Web Interface; Web Interface Configuration - Honeywell Touchpoint Plus User Manual

Hide thumbs Also See for Touchpoint Plus:
Table of Contents

Advertisement

4.17 Monitoring TPPL via the Optional Web Interface

You can view the TPPL status via an optional Web interface but you cannot currently control it remotely (due late 2016).
The following browsers are currently supported:
Chrome
IE10, IE11
IE8, IE9 (Trend / Plot is not available)
Safari
Other browsers may work but their performance may vary.
Note: Please contact Honeywell Support (back page) if a browser security update causes performance issues.

4.17.1 Web Interface Configuration

The Web Interface is an optional external PC interface tool that provides remote web clients with TPPL data in real time.
From late 2016 you will also be able to acknowledge, inhibit and reset I/O channels and remotely carry out calibration and
configuration.
The Web Interface supports two concurrent web clients but this does not prevent further users from accessing it, although
multiple users will degrade performance across all connected clients.
The TPPL Default IP address is 192.168.0.100, but this may have to be changed if you experience network conflicts or are
monitoring multiple TPPL systems. Please contact your Service Contact if you need help to do this.
The Web Interface shows the current TPPL status as follows:
Channel List View – shows up to six inputs and events with automatic scrolling
Channel Summary View – shows total counts for alarm 1, alarm 2, alarm 3, fault, warning and inhibits
Channel Output View – shows up to eight outputs and events
Key to examples below:
Channel marking in red – one or more input channels are in Alarm
Channel marking in yellow – one or more channels are in Fault
Channel marking in orange – one or more channels are in Inhibit
Channel marking in blue – one or more channels are in Warning
MAN0996_Iss 1_02/16
Pt. No. 3011M5044_EN
Daily Operation
Windows XP has known security issues and therefore must not be used with TPPL.
CAUTION
39
Touchpoint Plus
User Guide

Advertisement

Table of Contents
loading

Table of Contents