Autodesk 003A1-121111-1001 - AutoSketch v.9.0 Getting Started page 80

5 Clear all of the check boxes on this page. (You don't need database reports
in this tutorial.) Click Next.
On the next page of the wizard, select the layers for the drawing and the
fields in the database.
Note
wizard page, AutoSketch will ignore the Fields settings. So, you can leave the
database fields as they are preset on this page.
6 In the Layers list, clear the check boxes next to Electrical, Cable, Equip-
ment, Panel, and Personnel. Then, click Next.
Now, choose the page orientation that best displays the office layout.
|
74
Tutorial 3 — Create an Office Layout Drawing
Because you did not select any database reports on the previous