Setting The Test Tone; Input Setup; Setting The Digital In Assignment - Denon AVR-1507 Operating Instructions Manual

ENGLISH
System Setup

Setting the Test Tone

Set the volume of the various speakers so that the sound output from
the speakers and the subwoofer seems to have the same volume
level.
1 F F
Press to select "Yes".
2 F F G G
Press to set, then press
Auto:
Adjust the level while listening to the test tones produced
automatically from each speaker.
Test tones are automatically emitted from each speaker.
Manual:
Adjust with the speaker from which the test tone is output
switched manually.
3
When "Auto" mode is selected:
F F G G
Press to adjust the volume.
-1
• Test tones are output automatically, in the order shown below.
FL C FR
(2 speakers)
SW SL SBL
The volume can be adjusted within the range –12 dB to +12 dB.
3
When "Manual" mode is selected:
D D H H
Press to select the speaker, then press
-2
adjust the volume.
4
ENTER
Press to finish the Test Tone setting.
5
ENTER
Press to enter the setting and switch to the
Option Setup.
1
1 7 T . T O N E
2
H H
.
• To adjust the channel level separately for the different play modes
after setting the channel level, perform the operation on page 36.
¢ Adjusting the test tone using the remote control
unit
Adjustment of the test tones using the remote control unit is only
SR
possible in the "Auto" mode and only valid in the STANDARD (Dolby
Surround and DTS Surround) mode. The adjusted levels are
SBR
automatically stored for the different surround modes.
(1 speaker)
SB
1
Press
• Test tones are output from the different speakers.
2
F F G G Press
to
3
Press
Y e s <
T . T o n e A u t o >
3
T E S T T O N E O N
A U T O - F L
5
[TEST TONE]
.
F F G G
to adjust the volume.
[TEST TONE]
.
21
ENGLISH

Input Setup

Setting the Digital In Assignment

This assigns the different input sources for the digital input terminals.
1
F F G G
Press to select "2. In", then press
2 D D H H
Press to select the input terminals, then press
G G
to set.
CD, AUX, DVD, TV, VCR, V.AUX, CD-R:
Assign the different source according to the devices connected to
the AVR-1507's input terminals.
3
ENTER H H
Press or to enter the setting and switch to
the iPod Assignment setting.
1
I n p u t S e t u p
2
1 C O A X 1 C D
2 C O A X 2 A U X
3
5 i P o d
• Digital input terminal assignment not possible for "TUNER".
• It is not possible to make the "Digital In Assignment" settings for
the function assigned at "iPod Assignment".
System Setup
ENTER
.
F F
O F F