Setting The Digital In Assignment - Denon AVR-884 Operating Instructions Manual

ENGLISH
NOTES:
• When you adjust the channel levels while in the TEST TONE mode, the channel level adjustments made will affect all surround modes.
Consider this mode a Master Channel Level adjustment mode.
• You can adjust the channel levels for each of the following surround modes: DIRECT, STEREO, DOLBY/DTS SURROUND, 5/6 CH STEREO,
MONO MOVIE, ROCK ARENA, JAZZ CLUB, VIDEO GAME, MATRIX and VIRTUAL.

Setting the Digital In Assignment

• This setting assigns the digital input jacks of the AVR-1804/884 for the different input sources.
1
2
3
NOTE:
• PHONO, TUNER and V. AUX cannot be selected.
Setting the Video In Assignment
• This setting assigns the color difference (component) video input jacks of the AVR-1804/884 for the different input sources.
1
2
3
26
Select the digital input jack to be assigned to the input source.
• To select the digital input jack
• To select the input source
Select "OFF" if nothing is connected.
Press the ENTER or (down) button to enter the setting and switch the Component Video input setting.
Select the component (Y, P /C and P
B B
be assigned to the input source.
• Component video terminal selection
• Input source selection
Select "OFF" if nothing is connected.
Press the ENTER or (down) button to enter the setting and switch the Auto Surround Mode setting.
/C ) video input terminal to
R R