Power Consumption - Lexmark Dot Matrix User Manual

Notices
The WEEE logo signifies specific recycling programs and procedures for electronic products in countries of the European
Union. We encourage the recycling of our products. If you have further questions about recycling options, visit the
Lexmark Web site at www.lexmark.com for your local sales office phone number.
ENERGY STAR
Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply
with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.

Power consumption

Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description
Printing The product is generating hard‑copy output from electronic inputs.
Copying The product is generating hard‑copy output from hard‑copy original
documents.
Scanning The product is scanning hard‑copy documents.
Ready The product is waiting for a print job.
Power Saver The product is in energy‑saving mode.
Low Off (<1 W Off) The product is plugged into a wall outlet, the power switch is turned off, and
the product is in the lowest possible power consumption mode.
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. Visit www.lexmark.com for current values.
Power Saver
This product is designed with an energy-saving mode called Power Saver. The Power Saver Mode is equivalent to the
EPA Sleep Mode. The Power Saver Mode saves energy by lowering power consumption during extended periods of
inactivity. The Power Saver Mode is automatically engaged after this product is not used for a specified period of time,
called the Power Saver Timeout.
79
Power consumption
(Watts)
47 W
NA
NA
8 W
NA
0.45 W