Using the control panel
Using the Load/Unload function
Use the Load/Unload button to unload continuous forms from the printer to allow printing on either a cut form or an
envelope.
The Load/Unload function works only when the tractor unit is in the push position.
You can also use the Load/Unload button to load continuous forms into the printer when the paper path is clear, or to
change one type of pre‑printed form to another.
Locking and unlocking the control panel
To restrict the use of printer functions to the Start/Stop, FormFeed, Tear Off, and Load/Unload buttons, lock the control
panel. When the panel is locked, the
To lock the control panel:
1
Press and hold Start/Stop for five seconds.
2
Press and hold Load/Unload and Tractor, and then press Start/Stop.
To unlock the control panel:
1
Press and hold Start/Stop for five seconds.
2
Press and hold Load/Unload and Tractor, and then press Start/Stop.
Selecting a Tractor mode
Note: Because this function unloads continuous forms from the currently selected tractor, tear off excess paper prior
to initiating.
When the optional Tractor 2 Feeder is installed, you can press Tractor to unload the current continuous forms and
switch to the continuous forms loaded in the other tractor source.
The Tractor 2 light comes on when the optional Tractor 2 Feeder is selected.
light comes on.
20