Administrative Support; Restoring The Factory Default Settings - Lexmark Dot Matrix User Manual

Administrative support

Administrative support

Restoring the factory default settings

Restoring the US factory default settings
The factory default settings for the United States are:
• Code pages: 437
•
Character Set: 1
•
Form length: 11 inches
To restore the factory default settings:
1
Make sure the ribbon cartridge is installed and paper is loaded.
2
Press and hold Start/Stop for five seconds.
3
Open the ribbon access cover.
4
Move over the printhead toward the control panel side of the printer until it stops.
5
Close the ribbon access cover.
6
Press and hold Tear Off and Load/Unload , and then press Start/Stop.
7
Continue holding the buttons until the carrier moves.
Notes:
• The control panel lights blink on and off several times.
•
The factory default settings have been restored when the carrier moves.
Restoring the European Union factory default settings
The factory default settings for the European Union are:
•
Code pages: 858
•
Character Set: 2
•
Form length: 12 inches
To restore the factory default settings:
1
Make sure the ribbon cartridge is installed and paper is loaded.
2
Press and hold Start/Stop for five seconds.
3
Open the ribbon access cover.
4
Move over the printhead toward the control panel side of the printer until it stops.
5
Close the ribbon access cover.
6
Press and hold Tear Off and Tractor, and then press Start/Stop.
7
Continue holding the buttons until the carrier moves.
59