Changing Menu Settings (An Example) - Lexmark Dot Matrix User Manual

Understanding Setup mode and menu options
To Select
Forms Macro Options Macro
Data Options
Control Options
Emulation Options
Interface Options
4
Select any option from the Main menu by pressing the corresponding button.
Note: A new menu will print each time you press a button, displaying the new selection.
5
After you make all your selections, the printer will print a page with your changes reflected.
6
Press Set TOF until the printer returns to the Main menu, or press Pitch from any menu containing a Return to
Main menu selection.
7
Press Set TOF again to exit Setup mode.
New settings are saved only when the printer exits Setup mode.
Note: If the printer runs out of paper while you are using Setup mode, load more paper into the Tractor pins,
and then press Setup to continue.

Changing menu settings (an example)

Note: Make sure continuous forms are loaded in the printer when using Setup mode.
The following is an example of how to change the Menu Language setting.
1
With the printer in Setup mode, press Micro
2
Press Pitch to print more Control Options.
Control Options
Return to Main menu Off
Uni‑Dir Printing
Auto Ready Cut Sheet Enabled Macro
Paper Out Alarm
Bi‑Di alignment
Demo Print
(More)
3
To change the Menu Language, press Macro.
Control Options
Return to Main menu
Return to previous page Enabled LineFeed
Menu Language
Press
Micro
Micro
Setup
Pitch
Current Press
Set TOF
On LineFeed
Enabled Micro
Micro
Setup
Pitch
Current Press
English Set TOF
Macro
to print the Control Options menu.
49