Lexmark Dot Matrix User Manual page 28

Loading paper
7
Open the left and right tractor doors, and then place the paper holes over the second or third pins of the tractor
unit.
Notes:
•
If necessary, move the left or right tractor to adjust the tractors to the paper width.
•
Keeping the left tractor positioned to the left of the rubber tractor stop keeps your paper within the paper
sensor area.
8
Close the left and right tractor doors.
9
Move the tractor to align the left margin on your paper with the [A symbol printed on the rear plate.
Note: The distance from the [A symbol to the left edge of the paper determines the width of the left margin.
10
Push down the left tractor locking lever to lock the tractor in place.
11
Remove slack from the paper, and then lock the right locking lever.
28