Lexmark Dot Matrix User Manual page 38

Loading paper
9
Move the right paper guide so that the guide aligns with the right edge of the cut form or envelope.
1 Left paper guide
2 Cut form or envelope
3 Right paper guide
10
Insert the cut form or envelope into the printer until the Paper Out light stops blinking.
Notes:
•
If Auto Cut Sheet Load is set to On, then the paper feeds automatically to the Top‑Of‑Form.
•
If Auto Cut Sheet Load is set to Off, then press FormFeed.
11
Make sure the printer is online and the Ready light is on and solid green.
Note: If the Ready light is not on and solid green, then press Start/Stop.
1
2
3
38