HEIDENHAIN ITNC 530 User Manual page 663

Software option 1
Rotary table machining
Coordinate transformations
Interpolation
Software option 2
3-D machining
Interpolation
Block processing time
DXF converter option
Extracting contour programs
from DXF data
Dynamic collision monitoring (DCM) option
Collision monitoring in all
machine operating modes
Additional dialog language option
Additional dialog language
HEIDENHAIN iTNC 530
Programming of cylindrical contours as if in two axes
Feed rate in length per minute
Tilting the working plane
Circle in 3 axes (with tilted working plane)
Motion control with minimum jerk
3-D compensation through surface normal vectors
Using the electronic handwheel to change the angle of the swivel head during program
run without affecting the position of the tool point (TCPM = Tool Center Point
Management)
Keeping the tool normal to the contour
Tool radius compensation normal to the direction of traverse and the tool direction
Spline interpolation
Line in 5 axes (subject to export permit)
0.5 ms
Format supported: AC1009 (AutoCAD R12)
For plain-language and smarT.NC contour programs
Simple and convenient specification of reference points
The machine manufacturer defines objects to be monitored
Three warning levels in manual operation
Program interrupt during automatic operation
Includes monitoring of 5-axis movements
Slovenian
663