HEIDENHAIN ITNC 530 User Manual page 170

Editing functions for tool tables
Move to end of line
Copy highlighted field
Insert copied field
Add the entered number of lines (tools) at the
end of the table.
Insert a line for the indexed tool number after the
active line. The function is only active if you are
permitted to store multiple compensation data
for a tool (MP7262 not equal to 0). The TNC
inserts a copy of the tool data after the last
available index and increases the index by 1.
Application: e.g. stepped drill with more than one
length compensation value.
Delete current line (tool).
Display / Do not display pocket numbers.
Display all tools / only those tools that are stored
in the pocket table.
Leaving the tool table
Call the file manager and select a file of a different type, such as a
part program.
Additional notes on tool tables
MP7266.x defines which data can be entered in the tool table and in
which sequence the data is displayed.
You can overwrite individual columns or lines of a tool
table with the contents of another file. Prerequisites:
The target file must exist.
The file to be copied must contain only the columns (or
lines) you want to replace.
To copy individual columns or lines, press the REPLACE
FIELDS soft key (see "Copying a single file" on page 103).
170
Soft key
5 Programming: Tools