HEIDENHAIN ITNC 530 User Manual page 557

Group name, ID No.
Current position in the active
coordinate system, 270
Status of M128, 280
Status of M116, 310
TS triggering touch probe, 350
TT tool touch probe
Last touch point in TCH PROBE
Cycle 0 or last touch point from
manual operating mode, 360
HEIDENHAIN iTNC 530
Number Index Meaning
1 1 X axis
2 Y axis
3 Z axis
4 A axis
5 B axis
6 C axis
7 U axis
8 V axis
9 W axis
1 - 0: M128 inactive, –1: M128 active
2 - Feed rate that was programmed with M128
116 - 0: M116 inactive, –1: M116 active
128 - 0: M128 inactive, –1: M128 active
144 - 0: M144 inactive, –1: M144 active
10 - Touch probe axis
11 - Effective ball radius
12 - Effective length
13 - Radius setting ring
14 1 Center misalignment in reference axis
2 Center misalignment in minor axis
15 - Direction of center misalignment compared with 0°
position
20 1 Center point X axis (REF system)
2 Center point Y axis (REF system)
3 Center point Z axis (REF system)
21 - Probe contact radius
1 1 to 9 Position in the active coordinate system in axes 1 to 9
2 1 to 9 Position in the REF system in axes 1 to 9
557