HEIDENHAIN ITNC 530 User Manual page 71

Function Soft key
Directly the assume the actual position of the
tool (the measuring dial) as the new datum: This
function only saves the datum in the axis whose
field is currently highlighted.
Assign any value to the actual position of the tool
(the measuring dial): This function only saves the
datum in the axis whose field is currently
highlighted. Enter the desired value in the pop-up
window.
Incrementally shift a datum already stored in the
table: This function only saves the datum in the
axis whose field is currently highlighted. Enter
the desired corrective value with the correct sign
in the pop-up window.
Directly enter the new datum without calculation
of the kinematics (axis-specific). Only use this
function if your machine has a rotary table, and
you want to set the datum to the center of the
rotary table by entering 0. This function only
saves the datum in the axis whose field is
currently highlighted. Enter the desired value in
the pop-up window.
Write the currently active datum to a selectable
line in the table: This function saves the datum in
all axes, and then activates the appropriate row in
the table automatically.
HEIDENHAIN iTNC 530 71