Drive Monitoring - HP HPE SimpliVity 380 Gen10 Installation And Maintenance Manual

Callout
2
3
4

Drive monitoring

The LEDs on the front of each drive indicate when a drive has failed or is failing. If a drive fails, contact Customer Support
(https://www.hpe.com/support/hpesc) to obtain a replacement drive of the same type, size, and speed.
Note: HPE SimpliVity 380 Gen10 platforms may have different drive orientations and form factors but in general
use the same LED diagnostic codes.
User and federation data is protected by RAID and stored on the front drives.
Drives protected by RAID5 can tolerate one drive failure per RAID group without data loss.
Drives protected by RAID6 can tolerate two drive failures per RAID group without data loss.
Drives protected by RAID10 can tolerate one drive failure without data loss.
Function
Health LED
NIC status LED
UID button
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
LED
Solid green
Flashing green
Flashing amber
Flashing red
Solid green
Flashing green
Off
Solid blue
Flashing blue
Off
State
Normal operation
ILO is rebooting
System degraded
System critical
Linked to network
Network active
No network activity
Activated
One flash per second: Remote
management or firmware up-
grade in progress
Four flashes per second: ILO
manual reboot initiated
Eight flashes per second: ILO
manual reboot in progress
Deactivated
Server troubleshooting 22