Default System Message Logging Configuration - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

System Message Logging
Table 1 System Log Message Elements (continued)
Element
severity
MNEMONIC
description
This example shows a partial system message:
Syslog logging: enabled (0 messages dropped, 3 messages rate-limited, 0 flushes,
0 overruns, xml disabled)
Log Buffer (4096 bytes):
CHANGED: Interface Dot11Radio0, changed state to reset
*Mar
*Mar
(10.0.0.42)
*Mar
(10.0.0.42)
*Mar
(10.0.0.42)
*Mar
(10.0.0.42)
*Mar
eset
*Mar
*Mar
wn
*Mar
eset
*Mar
*Mar
82e8 Associated KEY_MGMT[NONE]
*Mar
Station 0002.8a29.82e8 Reason: Previous authentication no longer valid

Default System Message Logging Configuration

Table 2
Table 2
Feature
System message logging to the console
Console severity
Logging buffer size
Logging history size
Description
Single-digit code from 0 to 7 that is the severity of the message. For a description of the severity
levels, see Table 3 on page
Text string that uniquely describes the message.
Text string containing detailed information about the event being reported.
Console logging: level debugging, 74 messages logged, xml disabled
Monitor logging: level debugging, 0 messages logged, xml disabled
Buffer logging: level debugging, 76 messages logged, xml disabled
Logging Exception size (4096 bytes)
Count and timestamp logging messages: disabled
Trap logging: level informational, 78 message lines logged
1 17:02:19.618: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
1 17:14:21.520: %SYS-5-CONFIG_I: Configured from console by Cisco on vty0
1 17:36:33.519: %SYS-5-CONFIG_I: Configured from console by Cisco on vty0
1 17:56:48.596: %SYS-5-CONFIG_I: Configured from console by Cisco on vty0
1 18:12:01.670: %SYS-5-CONFIG_I: Configured from console by Cisco on vty0
1 19:35:39.710: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
1 19:35:39.718: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
1 20:52:06.007: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to do
1 20:52:06.022: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to r
1 20:52:06.035: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
1 23:47:38.851: %DOT11-6-ASSOC: Interface Dot11Radio0, Station
1 23:48:16.986: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating
shows the default system message logging configuration.
Default System Message Logging Configuration
8.
Default Setting
Enabled
Debugging (and numerically lower levels;
see Table 3 on page
4096 bytes
1 message
Cisco 3200 Series Wireless MIC Software Configuration Guide
Configuring System Message Logging
0002.8a29.
8)
3