Displaying The Tacacs+ Configuration; Configuring The Wmic For Local Authentication And Authorization - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Configuring the WMIC for Local Authentication and Authorization

Command
Step 5
show running-config
Step 6 copy running-config startup-config
To disable accounting, use the no aaa accounting {network | exec} {start-stop} method1... command
in global configuration mode.

Displaying the TACACS+ Configuration

To display TACACS+ server statistics, use the show tacacs command in privileged EXEC mode.
Configuring the WMIC for Local Authentication and
Authorization
You can configure AAA to operate without a server by setting the WMIC to implement AAA in local
mode. The WMIC then handles authentication and authorization. No accounting is available in this
configuration.
To configure the WMIC for local AAA, follow these steps, beginning in privileged EXEC mode:
Command
Step 1
configure terminal
Step 2
aaa new-model
Step 3
aaa authentication login default local
Step 4 aaa authorization exec local
Step 5 aaa authorization network local
Cisco 3200 Series Wireless MIC Software Configuration Guide
38
Purpose
Verifies your entries.
(Optional) Saves your entries in the configuration file.
Purpose
Enters global configuration mode.
Enables AAA.
Sets the login authentication to use the local username database. The
default keyword applies the local user database authentication to all
interfaces.
Configures user AAA authorization to check the local database to
determine whether the user is allowed to run an EXEC shell.
Configures user AAA authorization for all network-related service
requests.
Administering the WMIC