Service Set Identifiers; Supported Mibs; Mib List; Radio Channel Frequencies - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Preface
Organization
"Radio Channel and Transmit Frequency Configuration" describes how to configure settings for the
WMIC radio such as the role in the radio network.

"Radio Channel Frequencies"

identifiers, channel center frequencies, and regulatory domains of each
IEEE 802.11 radio.
"Dynamic Frequency Selection" describes how radios passively scan for and select the least-congested
channel.

"Radio Transmit Power"

describes how to manage radio transmit power.
"Multiple Client Profiles" describes how to configure multiple client profiles on the WMIC.

"Service Set Identifiers"

describes how to configure and manage multiple service set identifiers (SSIDs).
You can configure up to 16 SSIDs and assign different configuration settings to each SSID.
"Cipher Suites and WEP" describes how to configure the cipher suites required to use authenticated key
management, Wired Equivalent Privacy (WEP), and WEP features including MIC, CMIC, TKIP, CKIP,
and broadcast key rotation.
"Spanning Tree Protocol" descibes how to configure Spanning Tree Protocol (STP). STP prevents data
loops in your network.
"Cisco Discovery Protocol" describes how to configure Cisco Discovery Protocol (CDP) on your
WMIC. CDP is a device-discovery protocol that runs on all Cisco network equipment.
"Authentication Types" describes how to configure authentication types. Client devices use these
authentication methods to join your network.
"QoS in a Wireless Environment" describes how to configure quality of service (QoS) on your WMIC.
With this feature, you can provide preferential treatment to certain traffic at the expense of others.
"Configuring VLANs" describes how to configure your WMIC to interoperate with the VLANs set up
on your wired LAN.
"System Message Logging" describes how to configure system message logging on your WMIC.
"Tunnel Templates" describes how a a mobile router to carry multicast sessions to mobile networks as
it roams.
"WIMIC Troubleshooting" describes basic troubleshooting procedures, and lists the error and event
messages.
"Maximum Power Levels" lists the radio channels and the maximum power levels supported by the
world's regulatory domains.

"Supported MIBs"

lists the Simple Network Management Protocol (SNMP) Management Information
Bases (MIBs) that the WMIC supports.
"Filters" lists some of the protocols that you can filter on the WMIC.
"Simple Network Management Protocol" describes how to configure the Simple Network Management
Protocol (SNMP) on your WMIC.
"WDS, Fast Secure Roaming, and Radio Management" describes Wireless Domain Services (WDS), fast
secure roaming, and radio management features. The chapter also provides instructions for configuring
the WMIC to register with a WDS access point.
Cisco 3200 Series Wireless MIC Software Configuration Guide
xvi
OL-6415-04