Speed Command - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Configuring Radio Data Rates

speed Command

To manage the data rates on wireless devices, use the speed datarate interface command.
Table 3
Table 3
Keyword
rate
default
range
no speed
Radio Transmit Power
6
shows the data rate settings for the speed command.
Data Rates for speed Command Keywords
2.4 GHz 802.11b 2.4 GHz 802.11g
Radio Radio
basic-1.0, basic-1.0,
basic-2.0, basic-2.0,
basic-5.0, basic-5.0,
basic-11.0, 1.0, basic-11.0,
2.0, 5.0, 11.0 basic-12.0,
basic-18.0,
basic-24.0,
basic-36.0,
basic-48.0,
basic-54.0,
1.0, 2.0, 5.0,
11.0, 12.0, 18.0,
24.0, 36.0, 48.0,
54.0
The default basic-1.0,
keyword is not basic-2.0,
supported on basic-5.5,
802.11b radios. basic-11.0, 6.0,
9.0, 12.0, 18.0,
24.0, 36.0, 48.0,
54.0
basic-1.0, basic-1.0,
2.0, 5.0, 11.0 2.0, 5.0, 11.0,
12.0, 18.0, 24.0,
36.0, 48.0, 54.0
basic-1.0, basic-1.0,
2.0, 5.0, 11.0 2.0, 5.0, 11.0,
12.0, 18.0, 24.0,
36.0, 48.0, 54.0
4.9 GHz at
4.9 GHz at 5 MHz 10 MHz
basic-1.5, basic-3.0,
basic-2.25, basic-4.5,
basic-3.0, basic-6.0,
basic-4.5, basic-9.0,
basic-9.0, basic-12.0,
basic-12.0, basic-18.0,
basic-13.5, basic-24.0,
1.5, 2.25, 3.0, basic-27.0,
4.5, 9.0, 12.0, 3.0, 4.5, 6.0, 9.0,
13.5 12.0, 18.0, 24.0,
27.0
basic-1.5, 2.25, basic-3.0, 4.5,
basic-3.0, 4.5, basic-6.0, 9.0,
basic-6.0, 9.0, basic-12.0, 18.0,
12.0, 13.5 24.0, 27.0
basic-1.5, 2.25, basic-3.0, 4.5,
3.0, 4.5, 6.0, 9.0, 6.0, 9.0, 12.0,
12.0, 13.5 18.0, 24.0, 27.0
1.5, 2.25, 3.0, 3.0, 4.5, 6.0, 9.0,
4.5, 6.0, 9.0, 12.0, 18.0, 24.0,
12.0, 13.5 27.0
4.9 GHz at
20 MHz
basic-6.0,
basic-9.0,
basic-12.0,
basic-18.0,
basic-24.0,
basic-36.0,
basic-48.0,
basic-54.0,
6.0, 9.0, 12.0,
18.0, 24.0, 36.0,
48.0, 54.0
basic-6.0, 9.0,
basic-12.0, 18.0,
basic-24.0, 36.0,
48.0, 54.0
basic-6.0, 9.0,
12.0, 18.0, 24.0,
36.0, 48.0, 54.0
6.0, 9.0, 12.0,
18.0, 24.0, 36.0,
48.0, 54.0
OL-14978-01