Redundant Bridging - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Roles and the Associations of Wireless Devices
Figure 4
Figure 4

Redundant Bridging

Two pairs of bridges can be deployed to add redundancy or load balancing to a bridge link. The bridges
must use non-adjacent, non-overlapping radio channels to prevent interference, and they must use
Spanning Tree Protocol (STP) to prevent loops. (STP is disabled by default.)
Figure 5
Figure 5
shows bridges in a point-to-multipoint configuration.
Point-to-Multipoint Bridge Configuration
shows two pairs of bridges in a redundant configuration.
Redundant Bridge Configuration
Understanding Wireless Device Network Roles
Cisco 3200
Roles and the Associations of Wireless Devices
5