Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual page 285

WDS, Fast Secure Roaming, and Radio Management
Figure 4
Step 3 In the AAA Client Hostname field, enter the name of the WDS access point.
In the AAA Client IP Address field, enter the IP address of the WDS access point.
Step 4
In the Key field, enter exactly the same password that is configured on the WDS access point.
Step 5
From the Authenticate Using drop-down menu, select RADIUS.
Step 6
Click Submit.
Step 7
Repeat
Step 8
Click User Setup to browse to the User Setup page. You must use the User Setup page to create entries
Step 9
for the access points that use the WDS access point.
Add AAA Client Page
Step 2 through Step 7 for each WDS access point candidate.
Figure 5 shows the User Setup page.
Cisco 3200 Series Wireless MIC Software Configuration Guide
Configuring WDS and Fast Secure Roaming
7