Displaying The Radius Configuration - Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual

Administering the WMIC
Command
Step 3
radius-server key string
Step 4 end
Step 5 show running-config
Step 6 copy running-config startup-config
To delete the vendor-proprietary RADIUS host, use the no radius-server host {hostname | ip-address}
non-standard command in global configuration mode. To disable the key, use the no radius-server key
command in global configuration mode.
This example shows how to specify a vendor-proprietary RADIUS host and a secret key of rad124
between the bridge and the server:
bridge(config)# radius-server host 172.20.30.15 nonstandard
bridge(config)# radius-server key rad124

Displaying the RADIUS Configuration

To display the RADIUS configuration, use the show running-config command.in privileged EXEC
mode:
Purpose
Specifies the shared secret text string used between
the bridge and the vendor-proprietary RADIUS
server. The bridge and the RADIUS server use this
text string to encrypt passwords and exchange
responses.
The key is a text string that must match the
Note
encryption key that is used on the RADIUS
server. Leading spaces are ignored, but spaces
within and at the end of the key are used. If
you use spaces in the key, do not enclose the
key in quotation marks unless the quotation
marks are part of the key.
Returns to privileged EXEC mode.
Verifies your settings.
(Optional) Saves your entries in the configuration
file.
Cisco 3200 Series Wireless MIC Software Configuration Guide
Configuring and Enabling RADIUS
31