Cisco C3201FESMIC-TP= - 3201 Fast EN Switch Mobile Interface Card Expansion Module Software Configuration Manual page 263

Simple Network Management Protocol
Table 3
Notification Type
authenticate-fail
config
deauthenticate
disassociate
dot11-qos
entity
envmon temperature
snmp
syslog
wlan-wep
Some notification types cannot be controlled with the snmp-server enable global configuration
command, such as tty and udp-port. These notification types are always enabled. You can use the
snmp-server host global configuration command to a specific host to receive the notification types
listed in
Notification Types
Description
Enables traps for authentication failures.
Enables traps for SNMP configuration changes.
Enables traps for client device deauthentications.
Enables traps for client device disassociations.
Enables traps for QoS changes.
Enables traps for SNMP entity changes.
Enables traps for monitoring radio temperature. This trap is sent out when the
WMIC radio temperature approaches the limits of its operating range.
Enables traps for SNMP events.
Enables syslog traps.
Enables WEP traps.
Table 3.
Cisco 3200 Series Wireless MIC Software Configuration Guide
Configuring SNMP
7