Table of Contents
Advertisement
Message
"Exceeded max. No. of
results to display. Max.: n"
(A figure is placed at n.)
"Exceeded max. data
capacity. Check scanning
resolution, then press Start
key again."
"Exceeded max. data
capacity. Check the
scanning resolution, then
reset original(s)."
"Exceeded max. number of
alphanumeric characters for
the path."
"Exceeded max. number of
alphanumeric characters."
"Exceeded max. number of
files which can be sent at the
same time. Reduce the
number of the selected files."
Causes
Search results have
exceeded the max.
displayable number.
The scanned data exceeded
maximum data capacity.
The scanned original
exceeded maximum data
capacity.
The maximum number of
specifiable alphanumeric
characters in a path has
been exceeded.
The maximum enterable
number of alphanumeric
characters has been
exceeded.
The number of files
exceeded the maximum
number possible.
When Messages Are Displayed on the Control Panel
Solutions
Search again after changing the
search conditions.
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution. For details about the settings
for scan function, see "Relationship
between Resolution and Scan Size",
Scan
.
Specify the scan size and resolution
again. Note that it may not be possible
to scan very large originals at a high
resolution. For details about the settings
for scan function, see "Relationship
between Resolution and Scan Size",
Scan
.
The maximum number of characters
which can be entered for the path is
256. Check the number of characters
you entered, and then enter the path
again.
Check the maximum number of
characters which can be entered, and
then enter it again. For details about
the maximum enterable number of
characters, see "Values of Various Set
Items for Transmission/ Storage /
Delivery Function", Scan
Reduce the number of files, and then
send them again.
.
201
Advertisement
Table of Contents
