When Messages Are Displayed On The Control Panel; Messages Displayed When Using The Copy/Document Server Function - Ricoh Aficio MP 5002 User Manual

When Messages Are Displayed on the Control
Panel

Messages Displayed When Using the Copy/Document Server Function

This section describes the machine's main messages. If other messages appear, follow their instructions.
• If you cannot make copies as you want because of the paper type, paper size or paper capacity
problems, use recommended paper. For details about recommended paper, see p.138
"Recommended Paper Sizes and Types".
• For messages that are not listed here, see p.157 "When You Have Problems Operating the
Machine".
Message
"Cannot detect original
size."
"Cannot detect original
size."
Causes
The original placed on the
exposure glass is a non-
standard size.
Original is not placed, or the
original placed on the
exposure glass is a non-
standard size.

When Messages Are Displayed on the Control Panel

Solutions
• Place the original on the exposure
glass again. Face the original
down.
• If the machine cannot detect the
size of the original, specify the
size manually - do not use Auto
Paper Select mode or the Auto
Reduce/Enlarge function. For
details about specifying the
settings, see "Sizes Detectable
with Auto Paper Select", Paper
Specifications and Adding Paper
.
• Place the original correctly.
• Specify the paper size.
• When placing an original directly
on the exposure glass, the lifting/
lowering action of the ADF
triggers the automatic original
size detection process. Lift the
ADF by 30 degrees or more.
163