Loading Paper Into Tray 3 (Lct) - Ricoh Aficio MP 5002 User Manual

9. Adding Paper and Toner

Loading Paper into Tray 3 (LCT)

• When paper loaded in the right side of Tray 3 (LCT) runs out, paper on the left is automatically
shifted to the right. Do not pull out Tray 3 (LCT) while the tray is moving paper; wait until sounds
stop coming from the tray.
• For the right stack, align the right edge of the paper with the right edge of the tray. For the left
stack, align the left edge of the paper to the left edge of the tray.
• (mainly Europe and Asia)
Tray 3 (LCT) can hold A4 paper only. If you want to print on 8
contact your service representative.
• (mainly North America)
Tray 3 (LCT) can hold 8
contact your service representative.
1. Carefully pull out Tray 3 (LCT) until it stops.
2. Square the paper and load it print side up.
Do not stack paper over the limit mark.
• Whole tray pulled out
134
1
/ × 11 paper only. If you want to print on A4 from Tray 3 (LCT),
2
CJW320
CJW016
1
/ × 11 from Tray 3 (LCT),
2